打印本文 打印本文  关闭窗口 关闭窗口
WSH实用讲座:第一讲 获取机器的网络属性配置
作者:采集员 文章来源:来源于网络 点击数: 更新时间:2005/9/10 13:10:14
原文请到WSH(WHITE的小家)(http://wwwasp.yeah.net )
  其实就是读注册表,不过如果能获得机器的IP配置等信息,以后配置IIS时就简单了。下面的脚本读出机器的所有可用IP地
址,子网掩码,却省网关等信息:


代码:
--------------------------------------------------------------------------------

Option Explicit Dim WSHShell Dim sNic, sMan Dim Gateway Dim IPAddress Dim SubnetMask Dim i Dim
sTcpipRegKey Dim bIsDHCP Set WSHShell = CreateObject("WScript.Shell") sNic = WSHShell.RegRead
("HKLMSOFTWAREMicrosoftWindows NTCurrentVersionNetworkCards1ServiceName") If sTcpipRegKey
<> "Microsoft" And Err.Number = 0 Then   sTcpipRegKey = "HKLMSYSTEMCurrentControlSetServices" & sNic
& "ParametersTcpip"   bIsDHCP = WSHShell.RegRead(sTcpipRegKey & "EnableDHCP")   If bIsDHCP Then   
  Gateway = WSHShell.RegRead(sTcpipRegKey & "DhcpDefaultGateway")     IPAddress = WSHShell.RegRead
(sTcpipRegKey & "DhcpIPAddress")     SubnetMask = WSHShell.RegRead(sTcpipRegKey & "DhcpSubnetMask")  
   MsgBox ("DefaultGateway: " & Gateway(0) & Chr(10) & Chr(13) & "IPAddress: " & IPAddress & Chr(10) &
Chr(13) & "SubnetMask: " & SubnetMask)   Else     Gateway = WSHShell.RegRead(sTcpipRegKey
& "DefaultGateway")     IPAddress = WSHShell.RegRead(sTcpipRegKey & "IPAddress")     SubnetMask =
WSHShell.RegRead(sTcpipRegKey & "SubnetMask")     For i=0 to Ubound(IPAddress)-1       MsgBox
("DefaultGateway: " & Gateway(0) & Chr(10) & Chr(13) & "IPAddress: " & IPAddress(i) & Chr(10) & Chr(13)
& "SubnetMask: " & SubnetMask(i))     Next   End If End If

--------------------------------------------------------------------------------


  说明:机器的网络配置保存在注册表里,网卡项目下面,所以首先必须知道网卡的名字。然后取注册表数据,IP地址和子网掩
码都是数组形式(其实注册表里保存的是二进制数据,VBSCRIPT帮我们转换了)。在WSH里读注册表非常的简单,具体请看上面的
程序。



打印本文 打印本文  关闭窗口 关闭窗口