打印本文 打印本文  关闭窗口 关闭窗口
无组件上传图片至SQLSERVER数据库
作者:采集员 文章来源:来源于网络 点击数: 更新时间:2005/9/10 14:00:44
ength, PosE
CT = Request.ServerVariables("HTTP_Content_Type") 'reads Content-Type header
'response.write CT
'application/x-www-form-urlencoded
If LCase(Left(CT, 19)) = "multipart/form-data" Then 'Content-Type header must be "multipart/form-data"
'This is upload request.
'Get the boundary and length from Content-Type header
PosB = InStr(LCase(CT), "boundary=") 'Finds boundary
If PosB > 0 Then Boundary = Mid(CT, PosB + 9) 'Separetes boundary
Length = CLng(Request.ServerVariables("HTTP_Content_Length")) 'Get Content-Length header
if "" & UploadSizeLimit<>"" then
UploadSizeLimit = clng(UploadSizeLimit)
if Length > UploadSizeLimit then
' on error resume next 'Clears the input buffer
' response.AddHeader "Connection", "Close"
' on error goto 0
Request.BinaryRead(Length)
Err.Raise 2, "GetUpload", "Upload size " & FormatNumber(Length,0) & "B exceeds limit of " & FormatNumber(UploadSizeLimit,0) & "B"
exit function
end if
end if

If Length > 0 And Boundary <> "" Then 'Are there required informations about upload ?
Boundary = "--" & Boundary
Dim Head, Binary
Binary = Request.BinaryRead(Length) 'Reads binary data from client

'Retrieves the upload fields from binary data
Set Result = SeparateFields(Binary, Boundary)
Binary = Empty 'Clear variables
Else
Err.Raise 10, "GetUpload", "Zero length request ."
End If
Else
Err.Raise 11, "GetUpload", "No file sent."
End If
Else
Err.Raise 1, "GetUpload", "Bad request method."
End If
Set GetUpload = Result
End Function

'********************************** SeparateFields **********************************
'This function retrieves the upload fields from binary data and retuns the fields as array
'Binary is safearray of all raw binary data from input.
Function SeparateFields(Binary, Boundary)
Dim PosOpenBoundary, PosCloseBoundary, PosEndOfHeader, isLastBoundary
Dim Fields
Boundary = StringToBinary(Boundary)

PosOpenBoundary = InstrB(Binary, Boundary)
PosCloseBoundary = InstrB(PosOpenBoundary + LenB(Boundary), Binary, Boundary, 0)

Set Fields = CreateObject("Scripting.Dictionary")

Do While (PosOpenBoundary > 0 And PosCloseBoundary > 0 And Not isLastBoundary)
'Header and file/source field data
Dim HeaderContent, FieldContent
'Header fields
Dim Content_Disposition, FormFieldName, SourceFileName, Content_Type
'Helping variables
Dim Field, TwoCharsAfterEndBoundary
'Get end of header
PosEndOfHeader = InstrB(PosOpenBoundary + Len(Boundary), Binary, StringToBinary(vbCrLf + vbCrLf))

'Separates field header
HeaderContent = MidB(Binary, PosOpenBoundary + LenB(Boundary) + 2, PosEndOfHeader - PosOpenBoundary - LenB(Boundary) - 2)

'Separates field content
FieldContent = MidB(Binary, (PosEndOfHeader + 4), PosCloseBoundary - (PosEndOfHeader + 4) - 2)

'Separates header fields from header
GetHeadFields BinaryToString(HeaderContent), Content_Disposition, FormFieldName, SourceFileName, Content_Type

'Create one field and assign parameters
Set Field = CreateUploadField()
Field.Name = FormFieldName
Field.ContentDisposition = Content_Disposition
Field.FilePath = SourceFileName
Field.FileName = GetFileName(SourceFileName)
Field.ContentType = Content_Type
Field.Value = FieldContent
Field.Length = LenB(FieldContent)

Fields.Add FormFieldName, Field

'Is this ending boundary ?
TwoCharsAfterEndBoundary = BinaryToString(MidB(Binary, PosCloseBoundary + LenB(Boundary), 2))
'Binary.Mid(PosCloseBoundary + Len(Boundary), 2).String
isLastBoundary = TwoCharsAfterEndBoundary = "--"
If Not isLastBoundary Then 'This is not ending boundary - go to next form field.
PosOpenBoundary = PosCloseBoundary
PosCloseBoundary = InStrB(PosOpenBoundary + LenB(Boundary), Binary, Boundary )
End If
Loop
Set SeparateFields = Fields
End Function

'********************************** Utilities **********************************
Function BinaryToString(str)
strto = ""
for i=1 to lenb(str)
if AscB(MidB(str, i, 1)) > 127 then
strto = strto & chr(Ascb(MidB(str, i, 1))*256+Ascb(MidB(str, i+1, 1)))
i = i + 1
else
strto = strto & Chr(AscB(MidB(str, i, 1)))
end if
next
BinaryToString=strto

End Function

Function StringToBinary(String)
Dim I, B
For I=1 to len(String)
B = B & ChrB(Asc(Mid(String,I,1)))
Next
StringToBinary = B
End Function

'Separates header fields from upload header
Function GetHeadFields(ByVal Head, Content_Disposition, Name, FileName, Content_Type)
Content_Disposition = LTrim(SeparateField(Head, "content-disposition:", ";"))
Name = (SeparateField(Head, "name=", ";")) 'ltrim
If Left(Name, 1) = """" Then Name = Mid(Name, 2, Len(Name) - 2)
FileName = (SeparateField(Head, "filename=", ";")) 'ltrim
If Left(FileName, 1) = """" Then FileName = Mid(FileName, 2, Len(FileName) - 2)
Content_Type = LTrim(SeparateField(Head, "content-type:", ";"))
End Function

'Separets one filed between sStart and sEnd
Function SeparateField(From, ByVal sStart, ByVal sEnd)
Dim PosB, PosE, sFrom
sFrom = LCase(From)
PosB = InStr(sFrom, sStart)
If PosB > 0 Then
PosB = PosB + Len(sStart)
PosE = InStr(PosB, sFrom, sEnd)
If PosE = 0 Then PosE = InStr(PosB, sFrom, vbCrLf)
If PosE = 0 Then PosE = Len(sFrom) + 1
SeparateField = Mid(From, PosB, PosE - PosB)
Else
SeparateField = Empty
End If
End Function

'Separetes file name from the full path of file
Function GetFileName(FullPath)
Dim Pos, PosF
PosF = 0
For Pos = Len(FullPath) To 1 Step -1
Select Case Mid(FullPath, Pos, 1)
Case "/", "": PosF = Pos + 1: Pos = 0
End Select
Next
If PosF = 0 Then PosF = 1
GetFileName = Mid(FullPath, PosF)
End Function
</SCRIPT>
<SCRIPT RUNAT=SERVER LANGUAGE=JSCRIPT>
//The function creates Field object.
function CreateUploadField(){ return new uf_Init() }
function uf_Init(){
this.Name = null
this.ContentDisposition = null
this.FileName = null
this.FilePath = null
this.ContentType = null
this.Value = null
this.Length = null
}
</SCRIPT>

 

上一页  [1] [2] 



打印本文 打印本文  关闭窗口 关闭窗口